Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Norwood Homeowners
A broken garage door spring turns a working door into a dead weight, and it usually happens at the worst moment – the car’s inside, the door’s stuck halfway, and nothing about it will move until the spring is replaced. That’s the call we take most often in Norwood. Our technicians have up to 15 years of experience with high-tension torsion and extension spring systems, the most mechanically dangerous part of any door, and we carry the tools and training to handle them safely. Because we cover both the door and the opener, a spring problem rarely turns into a second appointment with a different contractor. Same-day service is often possible when you call early. Reach us at (866) 783-4096. We answer 24/7.
Key Takeaways
- Garage door spring repair in Norwood typically runs $180 – $340 for one spring.
- Matched spring pairs are usually replaced together, so a pair costs about twice that range.
- Torsion and extension springs are under extreme tension – this is never a DIY job.
- Same-day service is often possible; fast dispatch is available from 7am to 7pm, Sunday through Friday.
- We service Genie, Clopay, Amarr, Wayne Dalton, LiftMaster, Chamberlain, Craftsman, and Raynor systems.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
What Our Garage Door Spring Repair Service Includes
Springs are a small part of the door doing an enormous amount of work, and “spring repair” covers a lot of ground. Here’s what that looks like when we’re on the job.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on the shaft above the door, and it does the heavy lifting every time the door opens. When a torsion spring breaks, the door becomes extremely difficult or impossible to lift by hand, and forcing it can bend panels and warp the track. We replace torsion springs with the correct wire gauge and cycle rating for your door’s weight, then balance the door and test the opener’s travel. If your door uses a torsion setup on a Clopay or Amarr model, we’ll match the spring to the door’s original specification so the replacement lasts like the first one did.

Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door opens. They’re common on older doors, and when one lets go it can snap with real force – which is why safety cables matter so much on this setup. We replace extension springs in matched pairs and install or verify the safety cables that keep a broken spring contained. If only one spring has failed, replacing both keeps the door lifting evenly instead of straining the new one.

Broken Spring Repair
A broken spring is the classic “door won’t open” call, and the break is usually visible: a clean gap in the coil on a torsion spring, or a stretched-out, dangling spring on an extension system. We diagnose whether the break is the whole problem or whether it’s masking a worn cable, roller, or opener issue. Then we replace the failed spring and check the rest of the lifting hardware in the same visit, so you’re not back on the phone a week later.

Spring Adjustment
Sometimes the spring isn’t broken – it’s out of balance. A door that feels heavy, drifts down on its own, or slams shut instead of settling gently usually needs the spring tension adjusted. We set the tension to the door’s actual weight so the opener isn’t fighting the door on every cycle. Getting this right also takes load off the opener motor, which extends its life.
Safety Cable Installation
Safety cables are the steel cables that run through the center of extension springs, and they’re what stops a broken spring from flying across the garage. On older doors, they’re often missing or badly rusted. We install or replace safety cables on extension spring systems as a standalone job or alongside a spring replacement. It’s a small, inexpensive part that makes a real difference in how safely a failure plays out.
Spring Inspection
A spring inspection is a close look at the coils, cables, drums, and bearing plates for the wear that precedes a break. We check for gaps in the coil, rust, stretching, and uneven tension, and we tell you plainly what’s near the end of its life and what still has years left. If nothing needs replacing yet, we say so. If something is on the edge, you’ll know before it strands you.
Brands We Service for Garage Door Spring Repair
Springs are matched to the door, not to a brand name, but knowing how a specific make is built still saves time and prevents mistakes. We work on Genie systems and know how their spring and opener combinations wear over the years. We also service Clopay doors and are familiar with how their panel weights and spring configurations behave as the hardware ages. Amarr and Wayne Dalton doors come through our shop regularly too, and we know where their lifting hardware wears first.
Norwood Garage Door Repair is certified to work on eight major garage door and opener brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so you rarely hear “we don’t service that brand.” When your spring fails on a door you already own, we work with what’s installed rather than steering you toward a new system. We’re not tied to one manufacturer’s product line, which means the recommendation you get is about your door, not about what’s easiest for us to sell. Whether you have a Clopay, a Wayne Dalton, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
Springs don’t fail quietly, but the signs are easy to miss until the door stops working. Here’s what to watch for.
- A loud bang from the garage. A torsion spring breaking sounds like a gunshot or a heavy metal snap. If you heard that and the door won’t lift, the spring has likely failed – stop operating the door and call.
- The door won’t open, or opens a few inches and stops. This is the most common broken-spring symptom. The opener is trying to lift a door it can no longer lift, and running it that way can burn out the motor or strip the gear.
- A visible gap in the spring coil. On a torsion spring, look at the coil above the door – a clean gap means it’s broken. On extension springs, look for a stretched or dangling spring along the side tracks.
- The door feels heavy or slams shut. A door that won’t stay up on its own, or drops fast instead of settling, has lost spring tension. This puts stress on the opener and is a sign the spring needs adjustment or replacement.
- The door lifts crooked or sags on one side. Uneven lifting often means one spring in a pair has failed or weakened while the other still works. Running the door this way twists the panels and wears the track.
Our Garage Door Spring Repair Process – Step by Step
Spring work is precise, and the order of steps matters. Here’s how a spring repair actually goes when we’re on the job.
- 1
Phone diagnosis and scheduling. We ask what the door is doing – the sound, whether it lifts at all, how it feels by hand – so we arrive with the right springs and tools. That’s how we avoid a second trip and get you back to normal faster.
- 2
On-site inspection. We check the spring type, wire gauge, door weight, and the condition of the cables, rollers, and opener. We look for the cause behind the break, not just the break itself, because a worn cable or misaligned track can take out a new spring too.
- 3
Written estimate before any work. You get a clear price for the repair before we start. No surprises when the invoice arrives – the written estimate is the price.
- 4
Safe spring replacement. We use winding bars and proper tensioning tools to release and set the spring, then install the replacement and balance the door. This is the step that demands training – torsion springs are under extreme tension and can cause serious injury if handled wrong.
- 5
Testing and walkthrough. We cycle the door several times, check the balance and the opener’s travel limits, and show you what was replaced and what to watch for. Your garage door works or we’re not done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Norwood?
Garage door spring repair in Norwood typically runs $180 – $340 for one spring, including the replacement and the labor to set it safely. That’s the range most homeowners fall into, and the written estimate you get before work starts sets the final price.
A few things move the number within that range. The spring type matters – torsion and extension springs are different jobs with different hardware. Door weight and size affect which spring you need. And if the break took out a cable or damaged a roller, those add to the job. A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range.
| Job | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
How to avoid overpaying: get the estimate in writing before any work begins, ask whether the price covers balancing and testing, and ask whether one spring or a matched pair is being replaced. A free estimate should spell out what’s included, not just a total. Any work on springs is dangerous and belongs with a trained professional – this isn’t a job to attempt yourself, and a cheap fix that skips the balance check usually costs more later. Call (866) 783-4096 for a free estimate.
Garage Door Spring Repair Near Norwood – Our Service Area
We handle garage door spring repair across Norwood and the surrounding towns, including Westwood, Canton, Dedham, Stoughton, and Abington. If you’re farther out toward Whitman, Rockland, or East Bridgewater, we can still help – call and we’ll confirm timing. We also cover Hanover, Hanson, and Marshfield Hills. When a spring fails, timing matters, so we’ll tell you honestly when we can get there and what to expect. For spring work in Stoughton or Abington, the same process and pricing apply.
Serving Norwood, MA – Our Local Coverage Area
We serve Norwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Norwood
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance the door’s weight. When a spring breaks, the door becomes too heavy for the opener to lift, and the repair restores that balance. Because springs are under extreme tension, the work requires specialized tools and training. Our technicians handle both torsion and extension systems.
Most single-spring replacements take about an hour to ninety minutes on site, including testing and balancing. A matched pair, or a job that also involves cables or rollers, takes a bit longer. We give you a realistic time estimate when you call so you can plan around it. Call (866) 783-4096 for an exact quote – estimates are free.
Garage door spring repair in Norwood typically runs $180 – $340 for one spring, depending on spring type and what else the break affected. A matched pair is usually replaced together, so a pair costs about twice that range. The written estimate you receive before work starts sets the final price, so there are no surprises. Call (866) 783-4096 for a free estimate.
Yes – we’re certified to work on eight major brands, including Genie, Clopay, Amarr, Wayne Dalton, LiftMaster, Chamberlain, Craftsman, and Raynor. We know how each maker’s spring and opener setups wear over time. If your door is one of these makes, we’re set up to service it. Call (866) 783-4096 to confirm your model.
Same-day service is often possible when you call early, and spring repairs are high on our priority list because a failed spring leaves the door unusable. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 783-4096.
Warranty terms depend on the spring and the job, and we’ll explain what’s covered in writing before we start. Ask about it when you get your estimate so you know exactly what you’re getting. We stand behind the work – your garage door works or we’re not done.
Clear the floor under and around the door, and keep the door closed and the opener off until we arrive. Don’t try to lift the door by hand or force it – a door with a broken spring is dangerous to operate. If your car is inside, let us know when you call so we can plan around it.
Schedule Your Garage Door Spring Repair Service in Norwood Today
When a spring fails, you don’t need a sales pitch – you need the door working again. Call (866) 783-4096 for a no-obligation, free estimate on garage door spring repair in Norwood. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll give you an upfront price before any work starts. Your garage door works or we’re not done. For the broader picture, see our Norwood Garage Door Repair services, or learn more about garage door opener repair if the opener took damage when the spring let go.
Written by the team at Norwood Garage Door Repair.